esun HIPS 1.75mm / 3.0mm

890.00 ฿

HIPS หรือ High Impact Polystyrene
เป็นวัสดุ Support เหมาะสำหรับใช้คู่กับ ABS เนื่องจากมีจุดหลอมเหลวแล้วลักษณะการพิมพ์ใกล้เคียงกับ ABS โดย HIPS จะละลายได้ดีใน Limonene (ในขณะที่ ABS ละลายได้ดีใน Acetone) เมื่อพิมพ์แล้วเนื้อ ของ HIPS จะไม่ติดกับ ABS ทำให้แกะออกจากกันได้ค่อยข้างง่าย ดังนั้นในบางครั้งไม่จำเป็นตัองใช้ limonene ในการละลาย ABS สามารถแกะออกจากกันได้เลย

นอกจากนี้ยังสามารถพิมพ์ HIPS เป็นชิ้นงานได้เลย (เป็นได้ทั้ง Support หรือ จะใช้พิมพ์เป็นชิ้นงานเลยก็ได้)

น้ำหนัก : 1000g
ขนาด : 1.75mm / 3.0mm

Description

3D Printer Filament HIPS 1.75mm

  • สี : ขาว (White)
  • ใช้สำหรับ : 3D Printer,Flashforge Creator, แบบสองหัวฉีด หรือ Makerbot Replicator 2X
  • เส้นผ่าศูนย์กลาง : 1.7mm± 0.1mm การใช้งานเหมือน ABS
  • น้ำหนัก : หนึ่งม้วนหนัก 1.25Kg (เฉพาะเส้น 1Kg)
  • ละลายได้ดีใน Limonene เหมาะสำหรับใช้เป็นวัสดุ Support (ละลายให้หายไป โดยใช้ Limonene เมื่อพิมพ์ชิ้นงานเสร็จ)
  • บรรจุในถุุงปิด พร้อมสารดูความชื้น

HIPS

High Impact Polystyrene (HIPS) is a great support material for ABS parts as it is very similar to ABS in its properties (read more at Wikipedia), but works with different solvents (Limonene for HIPS vs acetone for ABS). Experiments are ongoing for HIPS as a support material due to Limonene not affecting ABS, and a similar cost (vs double for PVA). HIPS can be easily torn from the ABS leaving an even finish behind. Also, HIPS is soluble in chemical called Limonen, which doesn’t affect ABS. It can take between few hours and 2 or 3 days to dissolve the support. If possible, shake it some in a while so the soft support detach from the model.

ที่มา : http://reprap.org/wiki/HIPS

Additional information

diameter

1.75mm, 3.0mm